UNITHENE® HDPE resins are produced with low pressure gas phase process. The products are primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates, bottle caps and industrial containers.

Main applications：

Injection molding、Casting、Fine monofilament、Injection molding for crate、Extrusion coating、Flat yarn、Coarse monofilament、Film & Sheet extrusion.

Packing：

PE Bag	Paper Bag	Weight	Length x Width x Height
		25 kgs (net)	65(±2) x 42(±1) x 13(±3) cm

(Remark: Dimensions of packing are subjected to different types.)

SDS - Safety Data Sheet

HDPE Safety Data Sheet

Woven Bag - Flat yarn extrusion

Bottle Cap - Injection molding

HDPE Products：

#	Products	Main Applications	Density g/cm3	MI g/10min	File
1	LH503	Injection molding Compression molding	0.956	4.10
2	LH506	Injection molding	0.955	5.50
3	LH514	Injection molding Casting	0.956	12.00
4	LH523	Injection molding	0.956	23.00
5	LH5544	Master batch Powder coating Melt impregnation Bi-component filaments and nonwoven fabric Thin wall injection molding container	0.955	44.00
6	LH5564	Master batch Melt impregnation technique Thin wall injection molding Powder coating	0.955	64.00
7	LH5590	Master batch Powder coating Thin wall injection molding	0.955	90.00
8	LH606	Injection molding Fine monofilament	0.962	6.00
9	LH606-13	Injection molding for crate	0.962	6.00
10	LH614	Injection molding Casting	0.962	12.00
11	LH901	Flat yarn Coarse monofilament Film & Sheet extrusion	0.953	0.95

The information contained herein is, to our best knowledge, true and accurate. However, since conditions of use are beyond our control, all recommendations or suggests are presented without guarantee or responsibility on our part. We disclaim all liability in connection with the use of information contained herein or otherwise. All risks of such use are assumed by the user. Furthermore, nothing contained herein shall be constructed as an inducement or recommendation to use any process or to manufacture or use any product in conflict with existing or future patents.